Special equipment license qualification, laser cutting machine safety operation rules/methods---Liandu laser cutting machine

2
Special equipment license qualification, laser cutting machine safety operation rules/methods---Liandu laser cutting machine

1. Before work:

1.1 Carefully check whether the grinding wheel is cracked, and there must be no deflection. Otherwise, it must be replaced before it can be used.

1.2 Carefully check whether the cover is in good condition and whether it is firmly fixed.

1.3 Correctly choose the placement position of the machine. The front of the grinding wheel cutting blade rotation shall not face the crowd or the passing passage, and the workpiece to be cut shall not protrude into the crowd and passage. ---Liandu Laser Cutting Machine

2. At work:

2.1 The workpiece to be cut must be clamped before cutting.

2.2 The operator shall not face the grinding wheel.

2.3 The workpiece to be cut should be touched slowly first, and the knife should not be lowered quickly to prevent the grinding wheel from flying out and hurting people.

2.4 It is strictly forbidden to grind the workpiece on the side of the grinding wheel cutting blade.

2.5 When cutting, the chips need to be protected by the baffle.

2.6 When using the cutting machine continuously for a long time, you should pay attention to the motor temperature. ---Liandu Laser Cutting Machine

2.7 The protective cover of the grinding wheel shall be fixed in good condition, and the protective cover shall not be removed to use the grinding wheel.

2.8 Do not use workpieces or tools to switch the grinder on and off.

2.9 Before replacing the grinding wheel, lightly tap the grinding wheel to check whether there is any abnormality. After replacing the new grinding wheel, make sure that there is no person near the grinding wheel, and then run the test machine in an empty run.

2.10 The distance between the tool holder and the working surface of the grinding wheel shall not be greater than 3mm.

2.11 The workpiece should be pressed smoothly on the cylindrical surface of the grinding wheel. It is strictly forbidden for the workpiece to hit the grinding wheel and grind on the end face of the grinding wheel. Do not use excessive force when cutting.

2.12 When the grinding wheel is seriously worn, it should be replaced in time, and it should not be used continuously. ---Liandu Laser Cutting Machine

3. After work:

3.1 Turn off the power, clean the site, and place the cutting machine properly.

Contact Us

Contact Us